中文
English
1. Scraper and water, as the scraper can closely adhere to the glass to scrape off very fine dust.
2. Sponge blocks can be used to clean the glass. They can be used without damaging the glass and also to control the amount of water. It is advisable to wipe it with detergent once, then use an absorbent cloth to absorb the detergent, and finally wipe it with a dry cloth for a brighter finish.
3. Glass cleaner. Nowadays, everything can be utilized by humans. Our wisdom is very powerful, so we have this little gadget specifically for cleaning glass.
4. Two people can wipe from both sides. Sometimes both sides of the glass are dirty. In such cases, both people can start wiping from their respective sides and wipe from the top in comparison. This way, there's no need to switch back and forth.
5. If there is no platform outside the window, we can use a glass scraper to do it. Please note that you should not lean out alone to clean the glass. It's very difficult. If you have to clean it thoroughly, you can also sit on the window and use a long glass scraper to do it.
6. Hanging from top to bottom: Many buildings or companies hire professional glass cleaning Spider-Man. They can be suspended from the roof to clean the outside of the glass. They are quite professional, so it's better to hire professionals when necessary.
9. You can look for old newspapers. Newspapers are a commonly used method. There is oil left from printing on the surface, which can be used to wipe stains and dust on the glass and is very effective. Fold the newspapers into small pieces and wipe them. After wiping, the glass window will feel particularly bright.
8. Use water and a cloth. Soak a cloth in water, then place a dry cloth under the glass and stack it in a strip to catch the water. Next, use a wet cloth to pour water over the glass frame to wash away the floating dust and soil. Then, use a clean cloth to wipe the frame, and finally use a clean cloth to wipe the glass. From top to bottom, there will be no rework. This way of wiping can also clean the frame thoroughly.
7. Use a glass scraper. Our glass has no frames but only bay Windows. You can use a water sprayer and a glass scraper, which is quite professional. Mix glass cleaner with water and spray it on the glass. Then use the scraper to scrape off the dirt on the glass.
The characteristics of the internal structure of products from insulating glass manufacturers
Insulating glass is composed of two or more layers of flat glass. The four sides are bonded and sealed with high-strength and high-air-tightness composite adhesive to bond and seal two or more pieces of glass with sealing strips and glass strips. Dry gas is filled in the middle and desiccant is filled in the frame to ensure the dryness of the air between the glass plates. According to requirements, various types of glass sheets with different properties can be selected, such as colorless transparent float glass, patterned glass, heat-absorbing glass, heat-reflective glass, wired glass, tempered glass, etc., and combined with the frame (aluminum frame or glass strips, etc.) through bonding, welding or fusion to form the final product.
Insulating glass can be made of original sheet glass with thicknesses of 3, 4, 5, 6, 8, 10 or 12mm, and the thickness of the air layer can be 6, 9 or 12mm intervals. The thermal conductivity of glass is 27 times that of air. As long as the insulating glass is sealed, it can fully exert its heat insulation effect. High-performance insulating glass is different from ordinary insulating glass. Besides sealing dry air between the two layers of glass, a special metal film with good thermal performance is also coated on the air layer side between the outer layers of glass. It can block a considerable amount of energy from the sun that enters the room, achieving a greater insulation effect.
